VersaRouter_900P_PT_1080
HIGHLIGHTS
 
  • PROFINET/PROFIsafe/Modbus support
  • ISA100.11a or WirelessHART
  • Built in network manager
  • Rugged enclosure for industrial applications
 

The Nivis VersaRouter 900P (VR900P) is an all-in-one, industrial wireless router designed specifically for customers that are ready to deliver market leading wireless solutions with PROFINET support. The VR900P is architected for both ISA100.11a and WirelessHART and delivers the core benefits of PROFINET with its flexibility, efficiency and performance. From temperature sensors to gas monitors, the VR900P helps customers unlock and route valuable sensor data to PROFINET IO controllers in their DCS.

The VR900P with PROFINET exposes ISA100.11a node data and provides poll data via an external client. PROFINET is the open Industrial Ethernet standard of PROFIBUS and is a leading process automation protocol for data communications in factory, process and safety application environments. It is ideal for applications that require high-speed data throughput. With its rugged enclosure and intrinsically safe hardware design, the VR900P can be mounted directly in your process environment.

The VR900P MCS management software allows administrators to configure/view slot numbers, object IDs and method IDs within the Configuration settings of the console to match the GSDML in the PROFINET controller. The Nivis gateway software serves as the interface to the PROFINET Protocol Translator and the PROFINET stack within the system, which communicates with the PROFINET IO controller.

PROCESSOR / MEMORY
Freescale MCF5485ColdFire V4e microprocessor @200MHz with MMU and Hardware Encryption Engine
RAM memory64 MB DDR SDRAM
Flash memory16 MB NOR, 2MB BOOT
EEPROM128 byte serial EEPROM (used for factory settings and configuration)
PERIPHERALS / SOFTWARE
Ethernet channel1x10/100Base-T Ethernet Channel; RJ45 connector
Radio1 x VN210 IEEE 802.15.4 radio module
Operating systemLinux kernel 2.6 embedded
PROFINET/PROFIsafeSiemens PROFINET IO-device stack
Modbus supportModbus TCP
Antenna2.4GHz, 5.5dBi, outdoor omni antenna, N-type
ELECTRICAL / MECHANICAL
Input voltage24 VDC
Power consumption~8.5W
Power over Ethernet (POE)24V
Dimensions12.4” x 11.55” x 2.95” (LxWxH)
Enclosure/dust & waterNEMA 4x and IP67
Temperature range-40 to 60 ºC
Relative humidityMaximum 95%
CERTIFICATIONS
FCC: USAFCC Part 15 Section 247
IC: CanadaIC: RSS 210
ETSI: EUETSI EN 300 328
Giteki: JapanMPHPT Chapter 3, Section 4.18, Article 49.20
HazLoc: ETL / cETL (USA)ISA 12.12.01, CSA C22.2#213, UL 50, UL50E, CSA C22.2#94.1, CSA C22.2#94.2, UL 60950-1, CSA C22, 2#60950‐1
HazLoc IEC: (Japan)IEC 60079-0, IECEx Zone2, IEC 60529 (Japan) IEC 60079-15 (Japan)
HazLoc ATEX (CENLEC) (EU)CENLEC EN 60079-0, CENLEC EN 60079-15, CENLEC EN 60529, ATEX Category 3G (Zone 2)
Additional Safety: USAIEC 60950:1999 (equivalent to UL)
Additional Safety: EUCENLEC EN 60950-1
FEATURES
Up to 25 sensors
Field Device Tx every 2 seconds
PROFINET bus cycles of 128ms
End-to-end delivery with max 2.5 seconds from field device to PROFINET controller
Two layer mesh or star topology