VersaNode_310_PT_1080
HIGHLIGHTS
 
  • Dual boot support for both ISA100.11a and WirelessHART
  • Full API for easy integration
  • AES-128 bit security
 
VersaNode radio modules allow you to rapidly and cost-effectively develop wireless-enabled sensors using your choice of industry-standard protocols. To ensure forward-compatibility, only VersaNode modules offer a dual-boot capability with support for both the ISA100.11a and WirelessHART industrial protocols. VersaNode modules help you to minimize time and cost associated with the design, field deployment, and testing of your wireless sensors by leveraging our extensive experience in developing wireless sensor networks. VersaNode modules work in conjunction with a standards-based router, such as our VersaRouter series of all-in-one gateways, to enable users to connect and monitor their wireless industrial devices.
Key Benefits:
+ Greater reliability due to low packet error rates
+ Increased range means fewer bridging nodes
+ More flexibility with variable power output capabilities
MAXIMUM RATINGS
Voltage on any digital I/O-0.3V to 3.2V, typically 3.0V
Supply Voltage2.94 to 3.06, typically 3.0 V
RF Output Level (Nominal)max 10 dBm output power at antenna connector
Storage Temp Range-40 to 85 °C
Operating Temp Range-40 to 85 °C
NORMAL OPERATING CONDITIONS
Peak currentmax 160 mA TX mode, maximum output power
Voltage on analog pins0 to Vcc V (typically 3.0)
Voltage supply noisemax 200 mVpp 50Hz - 15 MHz
Storage and operating temperature-40 to 85 °C
Operating relative humidity10 to 90 %RH non condensing
Transmit currentmax 110 mA at 15dB
Hibernate current15 µA typical
ELECTRICAL / MECHANICAL
Output High-level Voltage (IOH = 5 mA) (All digital outputs)80% Vcc to Vcc
Output Low Voltage (IOL = -5 mA) (All digital outputs)0 to 20% Vcc
Input Low Voltage (All digital inputs)0 to 30% Vcc
Input High-level Voltage (all digital inputs)70% Vcc to Vcc
Input hysteresis (all digital inputs)min 0.06 x Vcc
RADIO
Frequency accuracy-10 to +10 ppm ± 4ppm at +25 °C
Operating frequency2.4000 to 2.4750 GHz
Number of channels15
Channel separation5 MHz
Occupied channel BW2.65 MHz
ModulationO-QPSK
Raw data rate250 kbps
Receiver sensitivity-98 dBm using non-coherent Differential Chip Detection (DCD), 50% PER
Output power adjustment range0 - 15 dBm adjustable in 1dBm increments
ANTENNA
Operating frequency2.4000 to 2.4835 GHz
Impedance50 Ω
Gain+2 dBi
PatternOmni-directional
Maximum VSWR2:1
ConnectorMMCX or RF pads on the module edge (can accommodate both MMCX straight connectors and right angle connectors)
CERTIFICATIONS
HazlocDesigned for use in intrinsincally safe devices
EMCFCC-US, IC-Canada, R&TTE/ETSI EN- EU, VCCI/M