VersaNode_210_PT_1080
HIGHLIGHTS
 
  • Dual boot support for both ISA100.11a and WirelessHART
  • Full API for easy integration
  • AES-128 bit security

 
The Nivis VersaNode 210 is the first commercially available radio to offer the industrial ISA100.11a standard. Architected to support ‘dual boot’ capabilities with both the ISA10011a and WirelessHART stacks on the same hardware, the VN210 allows customers to minimize the cost of design, field deployment, and testing. The VN210, in conjunction with a standards based router such as the VersaRouter 900, enables users to wirelessly monitor industrial devices.
Designed for ATEX Zone 2 and C1D2 nonincendive environments, the VN210 offers a full API for easy integration into your organization’s devices. From temperature sensors to gas monitors, the VN210 helps organizations unlock vital information about their operating environment. Leveraging AES-128 bit security, the VN210 is a low power, 10dBm, 2.4 GHz radio frequency transceiver with a 32-bit ARM7 core based MCU. The VN210 is also FCC, IC, R&TTE and VCCI approved.
MAXIMUM RATINGS
Supply Voltage-0.3V to 3.3V, typically 3.0V
Voltage on any digital I/O-0.3V to Vcc + 0.2V, typically Vcc
Input RF Level10 dBm input power at antenna connector
Storage Temp Range-40 to 85 °C
Operating Temp Range-40 to 85 °C
NORMAL OPERATIONG CONDITIONS
Supply Voltage2.7V to 3.3V
Voltage on analog pins0 to Vcc V
Voltage supply noisemax 200 mVpp 50Hz - 15 MHz
Peak currentmax 60 mA TX mode, maximum output power
Storage and operating temperature-40 to 85 °C
Operating relative humidity10 to 90 %RH non condensing
Transmit currentmax 60 mA
Receive currentmax 27, typical 21 mA
Hibernate current15 µA typical
ELECTRICAL / MECHANICAL
Output High-level Voltage (IOH = 5 mA) (All digital outputs)80% Vcc to Vcc
Output Low Voltage (IOL = -5 mA) (All digital outputs)0 to 20% Vcc
Input Low Voltage (All digital inputs)0 to 30% Vcc
Input High-level Voltage (all digital inputs)70% Vcc to Vcc
Input hysteresis (all digital inputs)min 0.06 x Vcc
RADIO
Operating frequency2.4000 to 2.4750 GHz
Number of channels15
Channel separation5 MHz
Occupied channel BW2.65 MHz
Frequency accuracy-40 to +40 ppm determined by the 24MHz crystal
Raw data rate250 kbps
Receiver sensitivity-98 dBm using non-coherent Differential Chip Detection (DCD), 50% PER
Output power9 to 12, typically 10 dBm, conducted, at antenna port
ANTENNA
Operating frequency2.4000 to 2.4835 GHz
Impedance50 Ω
Gain+2 dBi
PatternOmni-directional
Maximum VSWR2:1
ConnectorMMCX or RF pads on the module edge (can accommodate both MMCX straight connectors and right angle connectors)
CERTIFICATIONS
EMCFCC-US, IC-Canada, R&TTE/ETSI EN- EU, VCCI/M
HazlocETL/cETL, IEC, ATEX, CENLEC
Non-HazlocIEC (US & Canada), CENLEC EN (EU)