Industrial Wi-Fi Access Point, Dual RF, Dual Band, 802.11 a/b/g/n
  • Concurrent IEEE802.11 a/b/g/n for transmission rate up to 2x 300Mbps
  • Redundant power input supporting 802.3af PoE and 9-36VDC Input
  • Industrial grade conformal coating for harsh environment
  • Rugged Die-casting housing with -30 to + 80°C wide-temperature
  • The layer-2 Wireless Firewall gives protection from wireless attacks
  • Press-n-Connect to enable auto WDS/mesh network
  • Comprehensive WLAN security encryption with WEP, WPA/ WPA2, IEEE 802.1X or PSK
  • Multiple-SSID Virtual APs for grouping policy management
  • Tunnel-based AP management by backend AP controller

Design for industrial application in critical environment like factory, automation field, IWF 3320X Access Point embedded with 802.11a/b/g/n up to 300Mbps concurrently dual-band , dual RF solution inside an industrial grade metal chassis that support operating at -30~+80°C wide temperature.

To meet the expectation of high reliable communication in diversify application, IWF 3320X series provides robust redundant mechanism to ensure the trusted operation. The dual power input of both PoE 802.3af & wide voltage 9~36VDC ensures power connected all the time. The Dual RF can automatically backup the data transmission each other while any RF disconnect accidently that also can establish mesh network. Dual band radio of 2.4GHz and 5GHz can be separated into different path for application or management need, for instance, the 5GHz radio can be used for central backend communication while 2.4GHz radio is used for front end device communication.

The fast roaming capability within 20ms supports the on-the-move wireless communication without any concern in connectivity

Managed by backend AP controller, IWF 3320X supports CAPWAP thru private tunnel for security & users behavior control cross subnets. This will help IT manager in HQ easily maintain the access points located in local and\or remote sites, ex: oversea factory, branch office for unified management, and flexible grouping control.

Wireless Radio
Wireless Interface: Dual RF IEEE 802.11 a/b/g/n
Frequency band: Dual 2.4 GHz and 5 GHz
Wireless architecture:
(1) AP mode
(2) WDS mode (Repeater / Bridge)
(3) Mesh Network
(1) USA (Channel 1~11)
(2) Europe (Channel 1~13)
(3) Japan (Channel 1~13)
Data rate with auto fallback:
(1) 802.11a: 6 ~ 54 Mbps
(2) 802.11b: 1 ~ 11 Mbps
(3) 802.11g: 6 ~ 54 Mbps
(4) 802.11n: 6.5 ~ 300Mbps
Transmit Power:
(1) 802.11a: Up to 22dBm
(2) 802.11b: Up to 22dBm
(3) 802.11g: Up to 24dBm
(4) 802.11an: Up to 22dBm
(5) 802.11gn: Up to 22dBm
Receiver Sensitivity:
(1) 802.11a: -95dBm@6Mbps
(2) 802.11b: -95dBm@1Mbps
(3) 802.11g: -95dBm@6Mbps
(4) 802.11n: 802.11an HT20: -95dBm@MCS0
(5) 802.11an HT40: -91dBm@MCS0
(6) 802.11gn HT20: -95dBm@MCS0
(7) 802.11gn HT20: -90dBm@MCS0
Protocol & QoS support
IGMP Snooping
Proxy ARP
SNMP v1/v2c
DHCP client
SYSLOG client
RADIUS client
IEEE 802.1p/COS
IEEE 802.1Q Tag VLAN priority control
IEEE 802.11e WMM
IEEE 802.1D Spanning Tree Protocol
Handover & Roaming
IEEE 802.11i pre-auth (PMKSA cache)
IEEE 802.11f IAPP fast roaming with adjacent AP
WEP (64/128/152 bits)
EAP-TLS + Dynamic WEP
EAP-TTLS + Dynamic WEP
WPA (802.1X certification + TKIP)
802.11i WPA2 (PSK + CCMP/AES)
802.11i WPA2 (802.1X certification + CCMP/AES)
Hidden ESSID support
MAC Address filtering (MAC ACL)
MAC authentication with RADIUS servers
System Administration
Web-based administration
Provides Event Log
SYSLOG information support
Configuration backup and restore
One-button-click to restore factory default setting
Firmware upgrade
Capable of performing RADIUS Accounting and Accounting Update
Press-n-Connect to enable auto WDS/mesh network
Ethernet LAN Port Mapping (with a NEXCOM controller)
Wireless Signal Management
Number of ESSIDs (Virtual APs): 16
Number of associated clients: 256
Hardware Specifications
Antenna: 4 x omni-directional 2/3dBi (2.4/5GHz) enclosed
Uplink Port: 1 × GbE LAN with IEEE 802.3af PoE
LAN Port: 2 × GbE LAN
Push buttons: 1 x Reset, 2 x WES (Pess-n-Connect)
Console Port: 1 x DB9M
LED Indicators: 1 x Power, 1 x Status, 2 x WLAN, 2 x WES
Power Source: 9~36 Vdc & PoE
IP30 Dust proof metal case
Industrial grade conformal coating for anti-erosion and anti-moisture
Form factor: Industrial DIN Rail
Dimensions: 58.8 W x 139.6 Dx 167 H (mm)w/o antennas
Weight: 3.81 lbs (1.73kg)
Environment Protection
Operation Temperature: -30 ~ + 80°C (-22~158°F)
Storage Temperature: -40 ~ + 85°C (-40~185°F)
Operation Humidity: 0% ~ 95% (Non-condensing)
Vibration: Random 0.3g
RoHS compliant
Package Contents
NEXCOM IWF 3320X x 1
CD-ROM (User’s Manual and QIG) x 1
Detachable Dual-Band Antenna x 4 2/3dBi (2.4/5GHz)
Ethernet Cable x 1
Wall mount kit x1