3320X
Light Duty Industrial Access Point Dual RF, Dual Band 802.11a/b/g/n, 2/3dBi Detachable Antenna
HIGHLIGHTS
 
  • Tunneled AP Management incorporating with NEXCOM IWF controller
  • Multiple virtual APs for grouping policy/management
  • WDS and WES for extending wireless coverage
  • Dual RF for IEEE 802.11b/g/n+802.11a/n , MIMO 2*300Mbps high throughput
  • Dual power input: 802.3at PoE and 12VDC input
  • Supporting QoS & 802.11e WMM
  • Industrial-grade operating temperature -5~60℃
  • High power RF solution @ 24dBm (peak)
 

Targeting on light duty industrial & enterprise application, IWF 2220 is designed to be operating at 0~+60℃ with dual radio running with one 802.11b/g/n and one 802.11a/n (5GHz) to deliver up to 2*300Mbps throughput. The RF performance has been enhanced by PA and LNA for 4 times coverage than normal SoC chipset.

IWF 2220 supports tunnel based AP management, and comes with all standards demanded by enterprise applications, including business grade security (802.1X, WPA and WPA2), and multiple ESSIDs with VLAN tags to separate the traffic of different departments. Embedded with 802.11n/a + 802.11n/b/g dual-band 2×2 MIMO radios, the high speed (up to 300Mbps per radio) IWF 2220 is designed for wireless connectivity services. The well designed 24dbm high RF power, LNA (Low Noise Amplifier) and high gain antenna provides 4 times coverage than ordinary AP. The dual power input of PoE 802.3af & DC 12V ensures power connected all the time.

The light industrial environments include assembly line, warehouse, and staff office can adopt IWF2220 for Wi-Fi services and share the same central management functions from NEXCOM IWF WLAN controller.

Wireless Radio
Wireless Interface: IEEE 802.11b/g/n + 802.11a/n Radios operating in 2.4 GHz and 5 GHz frequencies
Wireless architecture:
(1) AP mode
(2) WDS mode (Repeater/ Bridge)
Modulation:
(1) OFDM (64-QAM, 16-QAM, QPSK, BPSK)
(2) DSSS (CCK, DBPSK, DQPSK)
(3) Mesh Network
Channels:
(1) USA: 1~11, 36, 40, 44, 48, 52~64, 100~136, 149~161
(2) Japan: 1~13, 36, 40, 44, 48, 52~64, 100~136
(3) Europe: 1~13, 36, 40, 44, 48, 52~64, 100~136
Data rate with auto fallback:
(1) 802.11a: 6~54 Mbps
(2) 802.11b: 1~11 Mbps
(3) 802.11g: 6~54 Mbps
(4) 802.11n: 6.5~300Mbps
Transmit Power:
(1) 802.11a: 21dBm@54Mbps ±2dB
(2) 802.11b: 24dBm@11Mbps ±2dB
(3) 802.11g: 21dBm@54Mbps ±2dB
(4) 802.11n 5G HT20 & HT40: 20dBm@MCS7 ±2dB
(5) 802.11n 2.4G HT20 & HT40: 21dBm@MCS7 ±2dB
Receiver Sensitivity:
(1) 802.11a: -70dBm@54Mbps ±2dB
(2) 802.11b: -85dBm@11Mbps ±2dB
(3) 802.11g: -70dBm@54Mbps ±2dB
(4) 802.11n 5G HT20: -65dBm@MCS7
(5) 802.11n 5G HT40: -62dBm@MCS7
(6) 802.11n 2.4G HT20: -65dBm@MCS7
(7) 802.11n 2.4G HT40: -62dBm@MCS7
Detachable Antenna: 4x dual-band (2.4GHz & 5GHz) 2 x 2 MIMO in SMA Connector
QoS-WMM
DiffServ/ TOS
IEEE 802.1p/ COS
IEEE 802.1Q Tag VLAN priority control
IEEE 802.11e WMM
Handover & Roaming
IEEE 802.11i pre-auth (PMKSA cache)
Security
WEP (64/128/152 bits)
EAP-TLS + Dynamic WEP
EAP-TTLS + Dynamic WEP
PEAP/MS-PEAP + Dynamic WEP
WPA (PSK + TKIP)
WPA (802.1X certification + TKIP)
802.11i WPA2 (PSK + CCMP/AES)
802.11i WPA2 (802.1X certification + CCMP/AES)
Setting for TKIP/ CCMP/AES key’s refreshing period
Hidden ESSID support
MAC Address filtering (MAC ACL)
MAC authentication with RADIUS servers
Maximum number of registered RADIUS servers: 2
System Management
Web-based administration
SNMP v1/v2c
Provides Event Log
SYSLOG information support
Statistics
Configuration backup and restore
Factory default setting restore
Firmware upgrade
Capable of performing RADIUS Accounting and Accounting Update
WES (Press-n-Connect) button for WDS Easy Setup
Support Tunneled AP Management with secure WLAN controllers
Support CAPWAP AP management
Support IPv6
Ethernet LAN Port Mapping (with a NEXCOM controller)
IGMP Snooping
Proxy ARP
Built-in Servers & Client Interfaces to Other Services
DHCP client
DNS client
SYSLOG client
RADIUS client
SNMP v1/ v2c client
Wireless Signal Management
Number of ESSIDs (Virtual APs): 2x 8
Number of associated clients: 2x 128
Setting for maximum number of associated clients
Network policy based on ESSID
Hardware Specification
Uplink Port: 1x 10/100/1000 Base-T Ethernet with IEEE802.3at PoE (as PD)
LAN Port: 4x 1x 10/100/1000 Base-T Ethernet
Antenna: 4x RP-SMA foldable antenna
Antenna gain: 2/3dBi @2.4/5GHz
Physical and Power
Support IEEE 802.3at PD
Form factor: wall mount
Dimension (WxDxH): 213 x 125 x 37.4mm (not include antenna)
Weight: 828g (AP include wall mount, not include antenna nor adapter)
PoE input: 802.3at
DC Jack: +12V/2A
Environmental Specification
Humidity 95% @ 60℃ (non-condensing)
Operating Temperature 0~+60℃
Storage Temperature: -20~80℃
Vibration: Random 0.3g
Certifications
FCC, CE
RoHS compliant
Package Contents
IWF 2220 x1
CD-ROM (with User’s Manual and QIG) x1
Detachable antenna x4
Ethernet cable x1